Miele G 7919 User Manual

Guide to the appliance
21
Display functions
The display is used to select or set the
following:
- the programme
- the Extras
- the timer
- the Settings
The display can show the following:
- the programme name
- the programme stage
- the estimated time left for the
programme to run
- the energy and water consumption
(EcoFeedback)
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
Touch the sensor to switch the
dishwasher back on.
The sensors on the control panel and in
the display react to fingertip contact.
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your
fingers.
Touch the required menu option to
select it.
The currently selected setting is marked
in orange and can be changed.
The OKsensor in the display is used to
confirm a message or setting and to
move to another menu level.
To exit a submenu use the sensor.
Touch the sensor at any time to
return to the Programmes menu.
If you do not press any sensors for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.

Miele G 7919 Specifications

General

Brand	Miele
Model	G 7919
Category	Dishwasher
Language	English