Miele G 7919 - Consumption (Ecofeedback)

Settings
47
Changing the electricity tariff times
You can change the start, finish, or
priority of an electricity tariff time.
 Select an energy tariff time from T1 to
T3 that you want to change.
 Select the Change option.
 Change the times if necessary and
confirm with OK.
 Change the priority if necessary.
The selected settings are displayed.
 Confirm the display with OK.
The change will be saved.
Deleting the electricity tariff times
You can delete the settings for an
energy tariff time and in doing so
deactivate the EcoStart option for this
time zone.
 Select an energy tariff time from T1 to
T3 that you want to delete.
 Select Delete.
 Confirm the query with Yes.
The settings for the electricity tariff time
selected will be reset.
 Confirm the message with OK.
The energy tariff time has been deleted.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme, and the actual
consumption during and after the end
of the programme.
You can also call up the total
consumption of energy and water for all
programmes you have run on your
dishwasher to date (see “Caring for the
environment - EcoFeedback
consumption display”).
DisplayingDisplay consumption
 Select the Display consumption menu
option.
 Select the desired setting.
DisplayingTotal consumption
 Select the Total consumption menu
option.
The values for energy and water are
displayed.
You can reset the values for the total
consumption.
 Select the Resetoption.
 Select the Yesoption.
The values are deleted.
 Confirm the message with OK.