Using for the first time
30
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Detergents -
Automatic dispensing/AutoDos”).
Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first programme (see
“Detergents - Activating AutoDos”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Detergents - Manual detergent
dispensing”).
Select the setting you want and
confirm with OK.
This setting applies to all programmes
and can be changed in a programme's
Extras menu.
Finally, prompts will appear in the
display.
After confirming these prompts with
OK, the messages Add salt and run the
“QuickPowerWash” programme with the
“Express” option without a load and
Refill rinse aid may appear.
Add salt and rinse aid if necessary
(see “Using for the first time -
Dishwasher salt” and “Rinse aid”).
Select OK to confirm the messages.
The display will change to the
Programmes menu.
To Next Page
Loading...
Need help?
General
