Miele G 7919 User Manual

Settings
49
Memory
When the Memoryfunction is switched
on, the most recently started
programme is saved.
When you switch the dishwasher off at
the end of a programme and then
switch it back on, the last programme
started will be selected. This may
increase energy consumption.
Refill reminders
If you only ever use combination
detergent products or automatic
dispensing using Miele PowerDisks (if
available), you can switch off the refill
reminders for reactivation salt and rinse
aid if you wish.
Please make sure that if you stop
using combination detergents, you
refill the dishwasher salt and rinse
aid. Switch the refill reminders back
on.
AutoOpen
In some programmes the door
automatically opens slightly to assist
the drying process.
This function can be deactivated if you
wish.
 Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
2nd interim rinse
You can choose this function to
increase the cleaning performance of
the programmes with a second interim
rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again (except for the ECO
programme).

Miele G 7919 Specifications

General

Brand	Miele
Model	G 7919
Category	Dishwasher
Language	English