EasyManua.ls Logo

Miele G 7919 - Automatic Dispensing;Autodos; Activating Autodos

Miele G 7919
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detergents
72
Automatic dispensing/AutoDos
Before you can use AutoDos, you must
insert a PowerDisk containing powder
detergent into the PowerDisk
compartment.
One PowerDisk contains enough
detergent for approx. 20cycles,
depending on the selected programme.
PowerDisks are available to order
directly from the Miele online store or
a Miele Experience Centre.
Risk of chemical burns from
residual detergent.
Detergents have a caustic effect.
This can cause health problems and
damage to surfaces. If the AutoDos
is used incorrectly or leaks, residual
detergent may drip onto the floor
area in front of the dishwasher.
Always remove residual detergent
from in front of the dishwasher
immediately.
Activating AutoDos
Switch the dishwasher on using the
sensor.
Before you use AutoDos for the first
time, remove the transport lock from
the PowerDisk compartment and
dispose of it appropriately.
Insert a PowerDisk (see “Automatic
dispensing/AutoDos - Inserting a
PowerDisk”).
The AutoDosfunction will be activated
automatically.
This setting applies to all programmes
and can be changed in a programme's
Extras menu.
If no programme is started for
48hours, the PowerDisk will
automatically be rotated so that the
detergent does not clump together. If
this happens, the messagePowder
refresh in progress will appear in the
display when the dishwasher is
switched on. No detergent is
dispensed during this refreshing
process.

Table of Contents

Related product manuals