Miele G 7919 User Manual

Settings
38
Water hardness
Your dishwasher is fitted with a water
softener.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7mmol/l (10-
15°dH - German scale), always
programme the dishwasher to the
higher value (2.7mmol/l or 15°dH in
this example).
If the water hardness in your area is
available in a unit other than °dH, you
can convert the values as follows:
1°dH = 0.18mmol/l = 1.78°fH
Setting the water hardness
 Select the water hardness level in
your area and confirm with OK.
AutoDos (automatic
dispensing)
Automatic dispensing automatically
adjusts the amount of detergent to the
selected programme. In the Auto45–
65°C programme, the quantity is
adjusted depending on the degree of
soiling of the crockery.
If you want to extend the service life of
the PowerDisk, you can reduce the
dispensing quantity. The programme’s
cleaning performance may decrease as
a result.
If you want to improve the cleaning
performance, you can increase the
dispensing quantity. This reduces the
service life of the PowerDisk.
Setting theDosage amount
For best results, you can adjust the
dispensing quantity of the PowerDisk.
 Select the Dosage amountmenu
option and confirm with OK.
 Select the setting you want and
confirm with OK.

Miele G 7919 Specifications

General

Brand	Miele
Model	G 7919
Category	Dishwasher
Language	English