Settings
43
Remote control
This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
“Settings - Miele@home”).
If you wish to permanently switch off
the Remote control option, you can do
this under this menu option. The
sensor will then no longer be
available to select until you change this
setting again.
Even if the Remote control option is
switched off, you can use the Miele App
to call up information about your
appliance. However, you cannot start
any programmes or change any
settings from it.
SuperVision
This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
“Settings - Miele@home”).
If you have connected your Miele
household appliances to your Wi-Fi
network, you can use your dishwasher
as the SuperVision master appliance.
This means you can monitor all Miele
household appliances connected to
your Wi-Fi network using your
dishwasher.
SuperVision display
In order to use your dishwasher as the
SuperVision master appliance, you have
to activate the SuperVision display.
Select the setting you want and
confirm with OK.
When you have activated the
SuperVision display, SuperVision
appears in the display.
Select SuperVision to switch to the
SuperVision display.
The status of the Miele household
appliances in your Wi-Fi network is
displayed when the SuperVision display
is activated.
To Next Page
Loading...
Need help?
General
