Chapter 1. How to Use the MilTouch
™
Control
Figure 6: The Password and System Clock Display
Typical View Legend
.
A. System Date button
B. System Time button
C. Recalibrate Touchscreen
button
D. Configuration Password
Enabled button
E. Set Configuration
Password button
F. Formulas Password
Enabled button
G. Set Formulas Password
button
H. Manual Functions
Password Enabled button
I. Set Manual Functions
Password button
J. Scroll buttons
K. Exit button
1.1.1.2.1.17.1
.
Set a Lockout Password—When the lockout password is turned ON, you must enter the
assword to see the programming, configuration, or manual function displays. p
Notice 2 : For this version of the machine software, the only way to recover a lost password is
to send an email to miltouch@milnor.com. Provide the machine serial number and the 10-digit
phone number of the facility where the machine is installed. You will receive a temporary
assword in email during normal business hours. p
1. Set the Enabled button to YES. This means the lockout password will be necessary to access
certain functions.
2. Touch the button for the functions you want to protect. The User Password display appears.
3. Touch the New Password box.
4. Enter the same password in both the New Password box and the Verify Password box. The
lockout passwords are not case-sensitive.
5. Touch the Exit button. The Configuration Display (
Figure 6) appears.
1.1.1.2.1.17.2
.
Set the System Date and System Time—The date and time fields are used on the Home
isplay and when data is collected. Enter the time in 24-hour format. d
1. Touch the System Date button or the System Time button.
2. Touch the field to change.
3. Enter the correct value in the box.
4. Touch the Save Changes button. The Configuration Display (
Figure 5) appears.
1.1.1.2.2. The Default Formulas by Laundry Type—This machine software includes typical
formulas for the commercial configuration. You can change these formulas or copies of them for
ther types of goods. o
1.1.1.3. The Data Transfer Display—You can save wash formulas from a MilTouch machine to an
xternal USB device or to an internal memory area in the controller. e
PELLERIN MILNOR CORPORATION
15
To Next Page
Loading...
Need help?
General
