Milnor 36026V7Z User Manual

Chapter 2. How to Update the Machine Software
Figure 27: File Transfer Display
Screen Legend
.
A. Media Format Available
indicator light
Data Set Name/Default
button
Machine Memory area
D. Left arrow button
E. Right arrow button
F. Configuration Data
button
G. Home button
H. External Memory area
are Update button
J. USB Mount button
B.
C.
I. Softw
7. Touch the Data Set Name button in the Machine Memory area on the right side of the screen.
Touch the Left Arrow button to export the form8. ula set from the machine to the flash drive.
9. When the screen shows that the formula set was exported successfully, touch the Check
button to confirm.
Touch the Configur10. ation Data button in the Machine Memory area on the right side of the
screen.
11. Touch the Default button.
12. Touch the Left Arrow button.
13. When the screen shows that the configuration was exported successfully, touch the Check
B port.
2.1.3. chine software?
1. F r
2. Follow the instructions in the window about attached USB drives, then touch the Check
flash
econds of inserting the flash drive, touch the
5. When the controller prompts that a new MilTouch version is available, touch the check box
r signals when it begins initializing the update.
w appears, touch the Update MilTouch button to begin
re to the controller.
button to confirm.
14. Touch the Home button to return to the Home screen.
15. Remove the flash drive from the US
How do I update the ma
rom the Home screen (Figure 24), touch the File Transfer button to view the File Transfe
screen (Figure 24).
button.
3. Insert the flash drive that contains the update, then wait for the machine to recognize the
drive.
4. If the status light does not glow green within 5 s
USB Mount button.
to run the update. The controlle
e windo6. When the second updat
copying the new softwa
PELLERIN MILNOR CORPORATION
27

Milnor 36026V7Z Specifications

General

Brand	Milnor
Model	36026V7Z
Category	Washer
Language	English