12-1
12 Maintenance and Testing
WARNING
Failure for the responsible individual, hospital or institution employing this equipment to implement a
satisfactory maintenance schedule may cause undue equipment failure and possible health hazards.
The safety checks or maintenance involving any disassembly of the equipment should be performed by
professional servicing personnel. Otherwise, undue equipment failure and possible health hazards could
result.
If you find a problem with any of the equipment, contact your service personnel or the manufacturer.
You can access the Maintenance screen in either of the following ways:
If the equipment is on, press the Power ON/OFF button and the “Select an option” window is displayed.
If the equipment is off:
For Pro, press the Power ON/OFF button, the third and fourth soft keys (from left to right) simultaneously;
While for Public, press the Power ON/OFF button, the second and third soft keys (from left to right)
simultaneously.
On the Maintenance screen, the system display information about the status of equipment, the battery and the
pre-connected pads. You can:
Press [Archives] to export patient data;
Press [Config.] to view or edit the current system configuration;
Press [User Test] to perform a user test as per the instructions on the screen;
Press [Device Info.] to check the product type, serial number, software and hardware versions, device status and
battery information and so on; and,
Press [Upgrade] to upgrade the current system software through USB device or wireless network.
NOTE
In Maintenance mode, only "Battery" alarm is reported.
To Next Page
Loading...
Need help?
General
