Mindray M6 User Manual

1-10 Safety Precautions
NOTE:
1. Read the following precautions to prevent the probe from malfunction:
 Clean and disinfect the probe before and after each examination.
 After the examination, wipe off the ultrasound gel thoroughly.
Otherwise, the ultrasound gel may solidify and the image quality
would be degraded.
2. Ambient conditions:
To prevent the probe from being damaged, do not use it where it will be
exposed to:
 Direct sunlight or X-rays
 Sudden changes in temperature
 Dust
 Excessive vibration
 Heat generators
Use the probes under the following ambient conditions:
 ambient temperature: 0℃～ 40℃
 relative humidity:30% ～ 85% (no condensation)
 atmospheric pressure:700 hPa ～ 1060 hPa.
Use the L16-4Hs and D7-2s probe under the following ambient conditions:
 ambient temperature: 10°C ～ 40°C
 relative humidity: 30% ～ 85% (no condensation)
 atmospheric pressure: 700 hPa ～ 1060 hPa
Use the DE11-3s probe under the following ambient conditions:
 ambient temperature: 18°C ～ 30°C
 relative humidity: 20% ～ 85% (no condensation)
 atmospheric pressure: 700 hPa ～ 1060 hPa
Use the C6-2Gs probe under the following ambient conditions:
 ambient temperature: 0°C ～ 40°C
 relative humidity: 20% ～ 85% (no condensation)
 atmospheric pressure: 700 hPa ～ 1060 hPa
3. Repeated disinfection will eventually damage the probe, please check the
probe's performance periodically.

Mindray M6 Specifications

General

Brand	Mindray
Model	M6
Category	Medical Equipment
Language	English