Mindray M9T User Manual

Care and Maintenance 11-9
Item
Content Method
7 ECG module
Check user’s basic operation. Verify the implementation of
ECG module.
See Chapter 5.3
11.3.4 Mechanical Safety Inspection
Mechanical safety inspection is mainly used to check mechanical strength and mechanical
function of the key assembly of ultrasonic system. The mode of test evaluation mainly is: Perform
the evaluation by means of visual check and operating check, if the check result cannot pass, the
system is in abnormal status now. Stop using the system and adopt proper measures. The test
flow is as following:
Check handle of main unit
Check control panel And
turning mechanism
Check other mechanics
Check the supporting part of
cart
Check the handle of cart
(optional)
Check the connection of cart
casters
Check casters of cart
(optional)
Check enclosure of main unit
Fig Mechanical Safety Inspection Flow
The table of Mechanical Safety Check:

Mindray M9T Specifications

General

Brand	Mindray
Model	M9T
Category	Medical Equipment
Language	English