I
Version Information
Mindray may revise this publication from time to time without written notice. The detailed
information is shown below:
Version
Release
Date
Reason for Revision
1.0 2013.12.30 Initial release
2.0 2014.1.27
Add the picture of field replaceable unit in Chapter 7.1;
Change the order number of the speaker and cable in Chapter 7.1;
Change the disassembly method of the shield cover of PHV board in
Chapter 8.2.10
3.0 2014.3.19
Add the precaution of the disassembly of the CPU assembly;
Update the content of the appendix C.1.25
4.0 2014.6.12
Update figures in chapter 8.2.7 since a pressure plate is added for
ECG cable;
Update contents of Z0501 in appendix C.1.25
5.0 2014.9.24
Change FRU materual No. in Chapter 7;
Change iStorage screen picture in section 3.5.5.1;
Add section 3.5.6 Network Configure;
Add in “4-protective grounding impedance” testing applies to M9
portable system with UMT-500Plus trolley (with power supply) only in
Appendix A.
6.0 2015.2.15
Add SONY UP-D898MD, UP-X898MD printers in chapter 2.1.4 along
with compatibility description.
7.0 2015.5
Section 7.1, add the part number of main board and SSD card used
for CE M9GI
Section 7.1, change the picture of SSD card
Section C.1.27, change the picture of keyboard testing
Add M9GI product model
8.0 2015.8 Section 3.5, add the wired network connection information.
11.0 2016.4.7 Section 7, change the wired network connection information.
12.0 2016.5.20 Section 7, the modification of the FRU.
13.0 2016.8.9 Update the labels in 1.2.2.
14.0 2017.1
Add M9Vet model.
Add 4D and TEE related self-test items in C.1.16 – C.1.19 chapter
Update trolley probe holder part number and add part number of
intracavity probe holder in 7.2 chapter
Add assembly/disassembly descriptions in 8.3.9 – 8.3.11 for probe
holders.
15.0 2017.6
Update Monitor Assembly(eDP screen/FRU), Monitor
Assembly(LVDS2eDP/FRU), CPU Module(6100 PC module/eDP
output/FRU), CPU Module(6100 PC module/LVDS output/FRU), M9
To Next Page
Loading...
Need help?
General
