[
2
]
The current settings will appear.
Move the cursor to the On / Off timer, and press the
button.
Button operation
[
1
]
Select "Timer" from the Main menu (refer to page 17), and
press the
button.
ON / OFF timer
The On/Off timer will not work in the following cases:
when On/Off timer is disabled, during an error, during check (in the service
menu), during test run, during remote controller diagnosis, when the clock is
not set, during Function setting, when the system is centrally controlled (when
On/Off operation from local controller is prohibited).
[
3
]
The screen to set the timer will appear.
Select the desired item with the
F1
or
F2
button out of "On / Off timer",
"On", "Off" or "Repeat".
Administrator passwaord setting. (Refer to page 51)
The unit automatically turns on or off at the preset time.
(ex. Operation start time PM 2:30/ Operation stop time AM 12:50/ only one)