Move the cursor to the "Main / Sub" with the
F1
or
F2
button, and press
the button.
Select "Initial setting" from the Main menu (refer to page 17), and press the
button.
When connecting two remote controllers, one of them needs to designated as a sub controller.
Select "Main" or "Sub" (refer to page 8) with the
F3
or F4 button, and
press the button.
Navigating through the screens
• To go back to the Main menu .................. button
• To return to the previous screen .............. button
If the setting is changed from "Sub remote controller" to "Main remote
controller", automatically restart after changing the settings.
To Next Page
Loading...
Need help?
General
