<For Mr.Slim>
<For City Multi>
[
4
]
Model name input.
Select the unit to be registered with the
F1
and
F2
buttons.
■
Input letters
Select from: A, B, C, D ... Z, 0, 1 2 ... 9, -, space
*Model names can be input up to 18 letters.
<For Mr.Slim>
■
Setting the "Registered unit" [OU] / [IU1] to [IU4]
• OU: Outdoor unit
• IU1: Indoor unit No. 1
• IU2: Indoor unit No. 2
• IU3: Indoor unit No. 3
• IU4: Indoor unit No. 4
* IU2 to IU4 may not appear depending on the type of connected air condi
-
tioner (single, twin, triple, quadruple).
Press the button.
• Repeat the above step, and register the model names for the outdoor unit
and indoor unit of the selected refrigerant address and M-NET address.
• Changing the refrigerant address and M-NET address
After the model name is registered above, press the button. The "3"
screen will appear. Change the refrigerant address and M-NET address, and
using the previous procedure input the Model name.
Move the input cursor to the left and right with the
F1
and
F2
buttons,
and select the letters with the
F3
and
F4
buttons.
<For Mr.Slim>
<For City Multi>
[
5
]
Select "Serial No. input" on the Maintenance information screen, and press
the button.
Cursor
The highlighted characters
are selected.
Register the Serial No. with the procedure given in [3] [4].
*Serial No. can be input up to 8 letters.
To Next Page
Loading...
Need help?
General
