The door mirrors are collapsible types with a sporty and
aerodynamic design.
• The door mirror is installed a little away from the
front pillar (off-body type) which takes into
consideration the slanted field of view to the front.
MECHANISM OF DOOR MIRROR WITH
PRINTED HEATING WIRE
There is a printed heating wire inside the mirror. When
the rear window defogger switch is turned ON, it
operates under the control of the ETACS for
Mirror
Body
All models are equipped with the electric remote
control mirror. The electric remote control switch is
installed on the left side of the instrument panel.
• Door mirrors with printed heating wire are adopted
on some models to clear frost and dew, etc. from
the surface of the mirror.
approximately 11 minutes along with the rear window
defoqqer.
For details, refer to GROUP 7 - ETACS.
Printed heating wire
18F0079
-
EXTERIOR - Door Mirrors
DOOR MIRRORS
Frame
Actuator assembly
To Next Page
Loading...
Need help?
General
