• Basic Connections
This section explains the basic connections you will need to make
between your TV, antennas, and VCR Yo_ will see there are
different connections shown depending upon whether you have a
cable box and the type of antenna youLare using. Choose the type
of connection for the equipment you have.
This section explains:
• TV+antenna or cable without a cable box,
• TV+cable with a cable box,
• TV+separate UHF and VHF antennas,
• TV+VCR+antenna or cable without a cable box,
• TV+VCR+cable with a cable box,
• TV+audio system, and
• TV+Mitsubishi products that have A/V Network
terminals.
DImportant: You must connect a VCR to to either EXT-1 or EXT-2 to see two
active images when using Picture-In-Picture (PIP).
28
Chapter 2 : Connecting Your TV
To Next Page
Loading...