Memorizing channels
_>Important:
Your TV automatically memorizes the channels you ,:an receive.
Once channels are memorized, you can scan through them using
the channel control on the renmte control and control panel.
To memorize channels: O
First Time Set-Up
Set the clock
• Memorize channels
Addldelete channels
Set AN Network
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
O
O
Press the MENU button on the
reraote control. The 'IV Main
Menu will appear on the screen.
Select "First Time Set-Up" using
the ADJUST button; then press
the ENTER button.
Select "Memorize channels"
using the ADJUST button; then
press the ENTER button.
Memorize channels
On which input would you
like to memorize?
Ant-A
Ant-B
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu,
Memorize channels
What is connected to
your "IV on Ant-A?
• Cable antenna
Indoor/outdoor antenna
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu.
0
0
The instructions for memorizing
channels will appear.
Choose either Antenna A (Ant-A)
or Aa_tenna B (_Mlt-B) to memo-
rize channels; tlhen press the
ENTER button. (Choose which-
ever input you connected your
antenna or cable to.) If you
connected an an_;enna to each
input, then you ,;hould memorize
the channels for the one input
now, and for the other input
later.
Use the ADJUST button to
choose the type of antenna you
connected: Cable antenna or
Indoor/outdoor antenna. Then
press the ENTER button.
Memorize channels
Now memorizing all the
stations you can receive
on Ant-A.
Channel 004
Not in memory
Please stand-by.
To cancel memorization,
press CANCEL.
O You will see a message that
,;tates that channel memoriza-
tion is in.progress. Memorized
channels will read "In memory";
channels not in memory say "Not
:in memory." You may stop
channel memorization at any
time by pressing the CANCEL
button.
The channel controls (CHANNEL) will work only after channels
have been programmed into memory. After memorizing, use the
channel controls (CI-LkNNEL) on the control panel or on the remote
control to change channels. Use the number buttons to select
individual channels.
58 Chapter 3 : Operating Your TV
To Next Page
Loading...
Need help?
General
