Troubleshooting (cont.)
Problems
Possible Solutions
For More Information
The remote control doesn't
work.
* Check that the batteries are
installed correctly.
See "Getting ready to use
_:he remote contror' in
C[Lapter 1 for an explana-
%ion of how to install batter-
:ies in the remol:e control.
Check the select button is
set to TV.
;See "Remote control but-
tons and functions" in
Chapter 1, which explains
where the selec, t button is
|ocated.
Be sure that you are point-
ing the top of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Getting ready to use
the remote control" in
Chapter 1, which contains
pointers for using the
remote control.
The TV takes several sec-
onds to respond to button
commands.
Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the function of the ENTER
button.
You can't access a channel.
Be sure that the cha_.nel
you want to view is pro-
grammed into memory.
Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing channels"
in Chapter 3, which explains
how to program channels
into the TV's memory.
Be sure you se][ected the
correct type of Antenna
((::able or indoor/outdoor)
when you memorized
ck annels.
See "Selecting the input
s(:urce" in Chapter 3, which
explains how to change the
input source.
94 Chapter 5 : Troubleshooting
To Next Page
Loading...
Need help?
General
