Mitsubishi QD51-R24 User Manual

3 - 56 3 - 56
MELSEC-Q
3 SPECIFICATIONS
3.10.3 In the case of the run mode
This section explains the case in which the QD51 (-R24) is set to the Run mode by GX
Developer
When it is turned ON or reset, and after the program to be run is read from the flash
ROM to the QD51 (-R24)'s program area (Refer to Section 3.5.1), the multitask
processing is executed.
The program to be run is read from the
flash ROM and loaded in the QD51
(-R24)'s program area. However, for a
program with a task which has the
multitask setting turned "ON", the program
is not read and loaded in the QD51
(-R24)'s program area.
Run the program read from the Flash ROM
in accordance with the multitask setting
contents.
• Start by turning on the power or by a
Reset.
• Start by an interrupt from the
programmable controller CPU
• Start by a start request from another
BASIC program.
Multitask processing
Power turned on
Initialization processing
Reading of the program to be run
QD51
(-R24)
[QD51(-R24)]
Internal
memory
Program
to be run
Flash ROM
Power turned on
100 V AC/
200 V AC
Power supply module
Programmable controller CPU

Mitsubishi QD51-R24 Specifications

General

Brand	Mitsubishi
Model	QD51-R24
Category	Controller
Language	English