When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone
and channel.
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other
users, you hear an invalid tone.
7.2.3.1
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-
regrouping channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
7.2.3.2
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Press the preprogrammed Reprogram Request button to send reprogram request to the
dispatcher.
The display shows RPGM and PLS WAIT.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
ACK RCVD and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows NO ACK.
7.3
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a
subscriber alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in Customer
Programming Software (CPS) to route the audio to the radio internal microphone, wired Remote
Speaker Microphone (RSM), or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible
activity surrounding the targeted radio.
7.4
Scan Lists
Scan lists are created and assigned to individual channels or groups. Your radio scans for voice
activity by cycling through the channel or group. The sequence of scan is as specified in the scan list
for the current channel or group.
Your radio supports different types of Scan Lists:
MN002667A01-AV
Chapter 7 : Advanced Features
43
To Next Page
Loading...
Need help?
General
