Diagnostics B
High-Definition DVR DCX3510-M • Installation Manual 68
365-095-17066-x.1
• MotoCar configuration and message count
• Version number of the SDV configuration message and number of minutes since
the version was last seen by the client
• Configured switched channels (SW) followed by the number of channels in the
Active Channel List (ACL).
• Version number of the Mini Carousel message and the time it was last seen
• Time and date of the last error recorded by the Client
• Last error code
• Service Group ID
• SDV QAM diagnostic parameter table consisting of entries for attempted and
successful SDV tunes and QAMs listed in the Auto Discover list. Table includes the
QAM frequency, the TSID, (“*” if a TSID mismatch exists), Auto Discovery
Indicator, if QAM is included in the Auto Discover List, Service group ID, count of
successful tunes to switched services, count of short term tune failures over the
last 24 hours, count of long term tune failures.
RF Modem (Upstream)
This diagnostic displays the RF modem status, if an RF modem is installed in the
DCX3510-M. The information is updated each time the DCX3510-M displays this
diagnostic.
Figure 34: RF Upstream Modem Diagnostic Screen
To Next Page
Loading...
Need help?
General
