Getting Started 1 - 3
Getting Started
To start using the MC55 for the first time:
•
Install a microSD card (optional)
•
Install the main battery.
•
Charge the MC55.
•
Power on the MC55.
Installing a microSD Card (MC55A0)
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
To install the microSD card:
1. Lift rubber access door.
2. Slide the SIM card holder door up to unlock.
3. Lift SIM card holder door.
Figure 1-3
Lift SIM Slot Holder Door
4. Lift microSD card holder door.
5. Insert the microSD card into card holder door ensuring that the card slides into the holding tabs on each
side of the door.
CAUTION Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Rubber access door
microSD card holder door
SIM card holder door
To Next Page
Loading...
Need help?
General
