Motorola MC55A0 User Manual

Getting Started 1 - 5
Figure 1-6 Insert microSD Card in Holder
5. Close the card holder door.
6. Slide to the left to lock into place.
7. Close rubber access door.
Installing the Battery
To install the battery.
1. Insert the battery, bottom first, into the battery compartment in the back of the MC55.
2. Press the battery down into the battery compartment until the battery release latch snaps into place.
Figure 1-7 Inserting the Battery
The MC55 powers up automatically after inserting the battery if the battery has been charged previously.
microSD card
Holding tab
NOTE The MC55 ships with either a 2400 mAh or 3600 mAh battery. The 2400 mAh battery is shown in this
installation procedure.
1
2
Battery
Battery Release Latch

Motorola MC55A0 Specifications

General

Brand	Motorola
Model	MC55A0
Category	PDA
Language	English