Bluetooth 4 - 5
Using Microsoft Bluetooth Stack
The following sections provide information on using the Microsoft Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, other Bluetooth devices cannot see or connect to the MC55. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in
close proximity.
Enabling Bluetooth
To enable Bluetooth:
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap > Setting > Connections > Bluetooth icon > Mode.
Figure 4-1
Bluetooth Mode
2. Check the Turn On Bluetooth checkbox.
3. Tap OK.
Disabling Bluetooth
To disable Bluetooth:
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap > Setting > Connections > Bluetooth icon > Mode.
2. Un-check the Turn On Bluetooth checkbox.
3. Tap OK.
NOTE On devices with Windows Mobile 6.5.3, turn the Bluetooth radio on or off using the Wireless Manager.
Tap the Status bar and select the Connectivity icon. Tap Wireless Manager.
NOTE To achieve the best battery life turn off radios not in use.
To Next Page
Loading...
Need help?
General
