1 - 4 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Figure 1-4
Insert microSD Card in Holder
6. Close the card holder door and push down until it is securely into place.
7. Close SIM card holder door and slide down until it locks into place.
8. Close rubber access door.
Installing a microSD Card (MC55N0)
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
To install the microSD card:
1. Lift rubber access door.
Figure 1-5
Lift SIM Slot Holder Door
2. Slide the microSD card holder door to the right to unlock.
3. Lift microSD card holder door.
4. Insert the microSD card into card holder door ensuring that the card slides into the holding tabs on each
side of the door.
microSD card
Holding tab
CAUTION Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Rubber access door
microSD card holder door
To Next Page
Loading...
Need help?
General
