MTS Exceed™ Series 40 Product Manual
30
Specifications
Introduction
Specifications
This section provides specifications for MTS Exceed Electromechanical Material
Testing System frames and accessory mounting dimensions.
Note Specifications are subject to change without notice. Contact MTS for
verification of critical specifications.
The load weighing system meets or surpasses the following standards:
• GB/T 16825.1
• ASTM E4
• BS 1610
• DIN 51221
• ISO 7500/1
• EN 10002-2
The strain measurement system meets or surpasses the following standards:
• GB/T 12160
• ASTM E 83
• BS 3864
• ISO 9513
• EN 10002-4
0Exceed product manual.book Page 30 Wednesday, August 27, 2014 2:55 PM
To Next Page
Loading...
