MTS Systems Exceed 40 Series User Manual

Specifications
MTS Exceed™ Series 40 Product Manual Introduction
31
Common Specifications
The following specifications are for all MTS Exceed frames. Specifications for
the specific models are located in the following tables.
Accuracy Grade
Class 0.5 / Class 1
Force range 0.4-100% of rated force capacity / 0.2-100% of rated force
capacity
Rated force capacity at max test speed 100%
Maximum test speed at rated force
capacity
100%
Force indicating accuracy
± 0.5 % of indicating / ±1% of indicating
Speed accuracy Set speed < 0.01 mm/min: speed accuracy is within ± 1.0% of set
speed
Set speed ≥ 0.01 mm/min: speed accuracy is within ± 0.2% of set
speed
Position accuracy Within ± 0.5%
Measurement range of strain 0.2 ~ 100% FS
Strain measurement accuraty Class 0.5 / Class 1
Security protection Over-Force, travel limits, over-voltage and others
Over force protection 10%
Data acquisition rate 1000 Hz
Control loop rate 1000 Hz
Environmental requirements
Operating temperature
Operating humidity
Storage temperature
Maximum storage humidity
Maximum altitude
For indoor use only
5-40°C (41-104°F)
5-85% Noncondensing
-18-49°C (0-120°F)
90% Noncondensing
2000 m (6562 ft)
Motor and drive system
AC Servomotor
Ball screws
Preloaded
Position measurement Encoder
Additional DC conditioning channels 2 channels
Additional incremental encoder
conditioning channels
2 channel
0Exceed product manual.book Page 31 Wednesday, August 27, 2014 2:55 PM

MTS Systems Exceed 40 Series Specifications

General

Brand	MTS Systems
Model	Exceed 40 Series
Category	Test Equipment
Language	English