mycom J Series User Manual

2205B0JE-DA-J-N_2014.05.
5 Maintenance and Inspection
Screw Compressor J-series 5.4 Disassembly and Assembly of the Compressor
5-68
5.4.21.2 Precautions for Removal
 Bearing
1.
Remove the bearing using the radial bearing
installing tool.
5.4.21.3 Precautions for Installation
 Spring pin
1.
Check for wear and damages. If anything wrong is found, replace with new spring pin.
 Bearing
1.
Lubricate the bearing face of the bearing head
with lubricant.
2. Insert the guide to the spring pin (4 dia.×10)
and align the cutout of the bearing to the
guide.
3. Install the bearing using the radial bearing
installing tool.

mycom J Series Specifications

General

Brand	mycom
Model	J Series
Category	Air Compressor
Language	English