NEC DECT G355 User Manual

Messaging
110
4. Highlight the required value for the option.
5. Press the Select soft key.
6. Press the Clr key one or more times to return
to the idle display.
Configuring the Sent message option
Use this option to control whether sent messages are stored in the
handset (option set to On) or not (option set to Off).
To configure the sent message option, perform the following steps:
1. Open the Message Settings menu as shown
in Accessing the Message settings menu
(page 108).
2. Highlight the Sent messages option.
3. Press the Select soft key.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

NEC DECT G355 Specifications

General

Brand	NEC
Model	DECT G355
Category	Telephone
Language	English