10. Highlight the required value for the option.
11. Press the Select soft key.
12. Press the Clr key one or more times to return
to the idle display.
Configuring the Silent answer message option
Use this option to control whether upon receipt of a special message
automatically a loud speaking call will be set up to an in the special
message defined number (option set to On) or not (option set to Off).
Contrary to the Auto answer msg option, no warning beep is given to
the user before setting up the call automatically.
To configure the Silent answer msg option, perform the following
steps:
13. Open the Message Settings menu as shown
in Accessing the Message settings menu
(page 108).
14. Highlight the Silent answer msg option.
15. Press the Select soft key.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
Need help?
General
