NEC DECT G355 User Manual

Call features
63
Change settings during a call
During a call, you can adjust the headset or loudspeaker volume and
mute the handset:
Adjusting the headset or loudspeaker volume (page 63)
Using mute during a call (page 63)
Adjusting the headset or loudspeaker volume
During a call, you can change the headset or loudspeaker volume using
the volume keys. A bar in the display increases or decreases to indicate
the volume setting. A beep sounds at the minimum or maximum volume
When you adjust the headset or loudspeaker volume, the handset
remembers the new setting the next time you use the handset.
To adjust the headset or loudspeaker volume, perform the following
step:
1. Press the Volume up or Volume down key to
configure the volume.
Using mute during a call
To deactivate (or activate) the handset microphone, perform the
following steps:
1. Press the Mute soft key to deactivate the
handset microphone.
2. Press the Unmute soft key to deactivate the
handset microphone.
Transferring a call
You can use this option to transfer a call or add a third party to a
conference call. The actual function depends on the capabilities and the
configuration of your communication system.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

NEC DECT G355 Specifications

General

Brand	NEC
Model	DECT G355
Category	Telephone
Language	English