NEC DECT G355 User Manual

Telephone settings
144
8. Press the Clr key one or more times to return
to the idle display.
Configuring the LED signal (I755 only)
The I755 DECT Handset has a three colored LEDs (red, green and
orange). The LEDs are used to indicate certain conditions to the user:
Missed call
Text message
Voice message
Text or voice message
Mandown
Low battery
The user can assign one of the above to each of the three LEDs (or use
Off if no condition is required for that LED).
To configure the LED settings, perform the following steps:
1. Open the General settings menu as shown in
Accessing the General settings menu (page
134).
2. Highlight the LED signal option.
3. Press the Select soft key.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

NEC DECT G355 Specifications

General

Brand	NEC
Model	DECT G355
Category	Telephone
Language	English