4. Highlight the Search for devices option.
5. Press the Pair soft key.
6. Use the Keypad: Enter the PIN code of your
Bluetooth headset (refer to your headset
documentation).
7. Press the Connect soft key.
8. Press the Clr key one or more times to return
to the idle display.
Connecting and disconnecting a paired Bluetooth headset
When you add a Bluetooth headset, the DECT Handset connects
automatically if active. The DECT Handset disconnects the Bluetooth
headset if the handset is inactive or out-of-range.
To connect and disconnect a Bluetooth handset manually, perform the
following steps:
1. Open the Bluetooth configuration menu as
shown in Accessing the Bluetooth
configuration menu (page 208).
2. Highlight the Paired devices option.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
Need help?
General
