Specify Your Internet Settings
27
AC1900 Cable Modem Voice Router
4. Select ADVANCED > Advanced Setup > IPv6.
If your Internet provider supports IPV6, the System Delegated Prefix field displays IPv6
information.
5. Select an IP Address Assignment radio button:
• Use DHCP Server.
This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCP client function.
• Auto Config.
This is the default setting.
This setting specifies how the modem router assigns IPv6 addresses to the home
network (the LAN).
6. Complete
the fields in the Server Settings section.
7. Click
the Apply button.
Your settings are saved.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits.
When one network device communicates across the Internet with another, the data packets
travel through many devices along the way. If a device in the data path uses a lower MTU
setting than the other devices, the data packets must be split or “fragmented” to
accommodate the device with the smallest MTU.
The best MTU setting for NETGEAR equipment is often the default
value. In some situations,
changing the value fixes one problem but causes another. Leave the MTU unchanged unless
one of these situations occurs:
To Next Page
Loading...
Need help?
General
