Control Access to the Internet
41
AC1900 Cable Modem Voice Router
Enable or Disable NAT
Network address translation (NAT) is a method of remapping one IP address space into
another by modifying network address information in Internet Protocol (IP) datagram packet
headers while they are in transit across a traffic routing device.
To enable or disable NAT:
1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > NAT Mode.
The NAT page displays.
5. Select or clear the Turn NAT On check box.
6. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
