Manage Your Network
95
AC1900 Cable Modem Voice Router
Run the Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable
and measures the time it takes messages sent from the originating device to reach a
destination computer and return.
To run a ping test:
1. Launch
a web browser from a computer or mobile device that is connected to the
network.
2. T
ype http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter
the modem router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Administration > Diagnostics.
In the Utility menu, Ping is selected by default.
5. Select
the Ping Test Parameters IPv4 or IPv6 radio button.
6. Specify
the following parameters for the ping utility:
• T
arget. The IP address of the ping target computer.
• Ping Size.
The size (in bytes) of the ping packet.
• No. of Pings.
The number of times to ping the target computer. The maximum
number of pings is 128.
• Ping Interval.
The time between pings.
7. Click
the Start Test button.
The ping results display.
To Next Page
Loading...
Need help?
General
