Technical Specifications
The following table shows the technical specifications for the router.
Table 5. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, Dynamic DNS, UPnP, and SMBData and routing protocols
North America: 120V, 60 Hz, input
All regions: 12V @ 1.5A output
Power adapter
Dimensions: 185 x 136.5 x 46 mm (7.2 x 5.4 x 1.8 in.)Dimensions
Weight: 250 g (0.55 lbs)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
FCC Part 15 Class BElectromagnetic emissions
Four RJ-45 ports supporting 10BASE-TLAN
One RJ-45 port supporting 10BASE-TWAN
Maximum WiFi signal rate complies with the IEEE 802.11 standard.
Note that the maximum wireless signal rate is derived from IEEE Standard
802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials
and construction, and network overhead, lower actual data throughput rate.
WiFi
One USB 2.0 portUSB
Auto-rate sensingRadio data rates
IEEE 802.11 b/g/n 2.4 GHz
IEEE 802.11 a/n/ac 5.0 GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node
(typically 50–70 nodes)
Maximum computers per WiFi
network
Supplemental Information
139
AC1200 WiFi Router Model R6120
To Next Page
Loading...
Need help?
General
Weight and Dimensions
