The router connects to the Internet.
6. If the browser does not display the installation assistant page, do the following:
• Make sure that the computer is connected to one of the four LAN Ethernet ports or over WiFi to the
router.
• Make sure that the router is receiving power and that its Power LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain
an IP address automatically from the router.
7. If the router does not connect to the Internet, do the following:
a. Review your settings.
Make sure that you selected the correct options and typed everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read You Cannot Access the Internet on page 130.
If problems persist, register your NETGEAR product and contact NETGEAR technical support.
Log In to the Router
When you first connect to your router and launch a web browser, the browser automatically displays the
router web interface. If you want to view or change settings for the router later, you can use a browser to
log in to the router web interface.
To log in to the router:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
You can also enter http://www.routerlogin.com or http://192.168.1.1.The procedures
in this manual use http://www.routerlogin.net.
Note
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
Change the Language
By default, the language is set as Auto.You can change the language.
Connect to the Network and Access the Router
18
AC1200 WiFi Router Model R6120
To Next Page
Loading...
Need help?
General
Weight and Dimensions
