MENU DESCRIPTION
Of course several inputs can be patched to one output (in the example above, Analog input
C and Analog input D are summed to the PS15 on channel 1). Be careful when patching
both analog and digital input together to one channel: It is very unlikely that the two
signals can be in phase. We recommend using this solution only for analog backup of
digital network, meaning that only digital or analog inputs will be used at a time.
Once a channel is patched, you can edit the patch for another channel by depressing the
“A” button (Back) and selecting another channel, or simply by directly pressing the
corresponding “Select” button for another channel (then the name of that channel will
appear on the bottom line of the LCD screen, in front of the channel select button).
On the above example you can see that input patch of channel 3 (PS15) is currently
edited, and that Analog input A and Digital input C are patched to this channel.
Save/recall user setups
User setups contain all the settings of the NXAMP4x1 Powered TDcontroller, so you can
consider that a user setup is a snapshot of the amplifier state. To access the Save/recall
menu, go to the “OPTION” menu, and select the sub-menu “3. Save/Recall” (see above).
PAGE 43 OF 80
To Next Page
Loading...
Need help?
General
