INDOOR TEMP. LOG
week
indoor temp.°C
indoor temp. log3.5
Here you can see the average temperature
indoors week by week during the past
year. The dotted line indicates the annual
average temperature.
The average outdoor temperature is only
shown if a room temperature sensor/room
unit is installed.
To read off an average
temperature
1.
Turn the control knob so that the ring on the shaft with the week number
is marked.
2.
Press the OK button.
3.
Follow the grey line up to the graph and out to the left to read off the average
indoor temperature at the selected week.
4.
You can now select to take read outs for different weeks by turning the
control knob to the right or left and read off the average temperature.
5.
Press the OK or Back button to exit read off mode.
Menu
3.5
NIBE VVM 320Chapter 3 | VVM 320 – at your service54
To Next Page
Loading...
Need help?
General
