Nibe VVM 320 User Manual

LANGUAGE
language4.6
Choose the language that you want the
information to be displayed in here.
Menu
4.6
HOLIDAY SETTING
holiday setting4.7
activated
start date
stop date
desired room
temperature
hot water comfort
cooling
pool
solar panel cooling
20.0°
off
off
off
economy
To reduce energy consumption during a
holiday you can schedule a reduction in
heating and hot water temperature. Cool-
ing, pool and solar panel cooling can also
be scheduled if the functions are connec-
ted.
If a room sensor is installed and activated,
the desired room temperature (°C) is set
during the time period. This setting applies
to all climate systems with room sensors.
Menu
4.7
If a room sensor is not activated, the desired offset of the heating curve is set.
One step is usually enough to change the room temperature by one degree, but
in some cases several steps may be required. This setting applies to all climate
systems without room sensors.
Vacation scheduling starts at 00:00 on the start date and stops at 23:59 on the
stop date.
TIP
Complete holiday setting about a day before your return so that room
temperature and hot water have time to regain usual levels.
TIP
Set the vacation setting in advance and activate just before departure
in order to maintain the comfort.
NIBE VVM 320Chapter 3 | VVM 320 – at your service70

Nibe VVM 320 Specifications

General

Brand	Nibe
Model	VVM 320
Category	Control Unit
Language	English