VVM 320 – An excellent choice
The indoor module can be connected to an optional low temperature
heat distribution system, e.g. radiators, convectors or underfloor heating.
It is also prepared for connection to a number of different products and
accessories, e.g. solar or other external heat source, extra water heater,
swimming pool and climate systems with different temperatures.
VVM 320 is equipped with a control computer for good comfort, good
economy and safe operation. Clear information about status, operating
time and all temperatures in the system is shown on the large and easy
to read display. This means, for example, that external unit thermometers
are not necessary.
EXCELLENT PROPERTIES FOR VVM 320:
•
Water heater
There is a water heater integrated in VVM 320, which is insulated with
environmentally friendly cellular plastic for minimal heat loss.
•
Buffer vessel
There is a buffer vessel integrated in the indoor module that equalises
the temperature of the water that is sent out in the climate system.
•
Scheduling the indoor comfort and hot water
Heating and hot water can be scheduled for each day of the week or
for longer periods (vacation).
•
Large display with user instructions
The indoor module has a large display with easy-to-understand menus
that facilitate setting a comfortable climate.
•
Easy to install
The indoor module (VVM 320) is easy to install together with a compat-
ible NIBE air/water heat pump. When installing together with NIBE
air/water heat pump, the heat pump’s values can easily be read off
from the indoor module’s display.
•
External heat source
VVM 320 is prepared for easy connection to oil/gas/ wood fired boiler
or district heating.
NIBE VVM 320Chapter 1 | Important information8
To Next Page
Loading...
Need help?
General
