127
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
h AF Assist
Enable or disable AF-assist illumination.
u Digital Zoom
Enable or disable digital zoom.
B Notes on Digital Zoom
• When using digital zoom, AF area mode is set to Center and cannot be changed (A 104).
• Digital zoom cannot be used in the following situations.
- When Scene auto selector, Portrait or Night portrait is selected for scene mode
- When smart portrait mode is selected
- When subject tracking mode is selected
- When Multi-shot 16 is selected (A 101)
- Before movie recording begins (digital zoom of up to 2× can be applied while movies are being
recorded)
• When using digital zoom, Metering is set to Center-weighted.
Press the d button M z (Setup menu) (A 117) M h AF assist
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 3.0 m (9 ft. 10 in.) at the maximum
wide-angle position and about 1.0 m (3 ft. 3 in.) at the maximum telephoto
position. However, note that for some scene modes, AF-assist illumination turns
off automatically (A 38 to 44) even if Auto is set.
Off
Disable this function. The camera may be unable to focus if lighting is poor.
Press the d button M z (Setup menu) (A 117) M u Digital zoom
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating
and hold the zoom control at g (i) triggers digital zoom (A 27).
Off
Digital zoom will not be activated (except when shooting a movie).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
