144
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 120
B
Battery is running
low.
Prepare to charge or change
battery.
14, 16
N
Battery exhausted.
Battery exhausted. Charge or replace battery. 14, 16
P
Battery temperature
high
Battery temperature
is high.
Turn off camera, and allow battery
to cool down before resuming
use. After five seconds, this
message will disappear, the
monitor will turn off, and the
power-on lamp will blink rapidly.
After the lamp blinks for three
minutes, the camera will turn off
automatically, but you can also
press the power switch to turn it
off manually.
19
Q (blinks red)
Camera cannot
focus.
• Refocus.
• Use focus lock.
28, 29
105
P
Please wait for the
camera to finish
recording.
Camera cannot
perform other
operations until
recording is
complete.
Wait until message clears from
display automatically when
recording is complete.
–
N
Memory card is write
protected.
Write-protect switch
is in “lock” position.
Slide the write-protect switch to
“write” position.
23
P
This card cannot be
used.
Error accessing
memory card.
• Use an approved card.
• Check that connectors are
clean.
• Confirm that memory card is
correctly inserted.
138
22
22
P
This card cannot be
read.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
