EasyManuals Logo

Nikon Coolpix S640 User Manual

Nikon Coolpix S640
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
33
Using the Flash
Basic Photography and Playback: Auto Mode
B Shooting When Lighting is Poor and When the Flash is Disabled (W)
Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake. Set Vibration reduction (A 125) in the setup menu (A 116) to Off when using
a tripod to stabilize the camera during shooting.
The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken
when E is displayed may be slightly mottled.
When E is displayed and higher sensitivity is applied, noise reduction may be automatically
applied as pictures are recorded. This will result in increased recording times.
B Note on Using the Flash
Reflections from dust particles in the air may appear as bright spots in pictures. To reduce these
reflections, set the flash to W (off).
C The Flash Lamp
The flash lamp indicates the flash status when the
shutter-release button is pressed halfway down.
On : Flash will fire when picture is shot.
Blinks : Flash is charging. Wait a few seconds and try again.
Off : Flash will not fire when picture is shot.
If the battery is low, the monitor display will turn off, and
remain off, until the flash is fully charged.
C Flash Setting
The default flash mode setting varies with shooting mode.
A (auto): U auto.
Scene mode: setting varies for different scene modes (A 38-44).
F
(smart portrait) mode: set to
W
off (when Blink Proof is on),
U
auto (when Blink Proof is off) (
A
53)
Flash cannot be used simultaneously with certain features (A 109).
s (subject tracking): W off
The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
C Red-eye Reduction
This camera uses Advanced Red-eye Reduction (“In-Camera Red-Eye Fix”).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
If the camera detects “red-eye” when a picture is taken, Nikon’s own In-Camera Red-Eye Fix
processes the image before it is recorded.
Note the following when taking pictures:
Because pre-flashes are fired, there is a slight lag between when the shutter-release button is
pressed and when the picture is shot. This mode is not recommended when a quick shutter
response is required.
The time required to save the picture increases slightly.
Advanced red-eye reduction may not produce the desired results in some situations.
In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye
reduction processing; in these cases, choose another mode and try again.

Table of Contents

Other manuals for Nikon Coolpix S640

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nikon Coolpix S640 and is the answer not in the manual?

Nikon Coolpix S640 Specifications

General IconGeneral
Megapixel12.2 MP
Camera typeCompact camera
Sensor typeCCD
Image sensor size1/2.33 \
Maximum image resolution4000 x 3000 pixels
Still image resolution(s)640 x 480, 1024 x 768, 2048 x 1536, 2592 x 1944, 3264 x 2448, 3968 x 2232, 4000 x 3000
Digital zoom4 x
Optical zoom5 x
Focal length range2.7 - 6.6 mm
InterfaceUSB 2.0
Digital SLRNo
Effective sensor resolution12.39 pixels
Focus adjustmentAuto
Super Macro focusing range0.02 m
Internal memory45 MB
Compatible memory cardssd, sdhc
Display diagonal2.7 \
USB version2.0
Product colorWhite
Battery typeEN-EL12
Weight and Dimensions IconWeight and Dimensions
Depth20.5 mm
Width91 mm
Height55 mm
Weight110 g

Related product manuals