16
First Steps
Charging the Battery
Charge the supplied Rechargeable Li-ion Battery EN-EL12 inserted into the
camera, by connecting the supplied Charging AC Adapter EH-68P to the camera
via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter
into an electrical outlet.
1 Prepare the Charging AC Adapter
EH-68P.
If a plug adapter* is included, attach the
plug adapter to the plug on the Charging
AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the
two are connected, attempting to forcibly
remove the plug adapter could damage the
product.
* The shape of the plug adapter varies
according to the country or region in which the camera was purchased.
For Customers in Argentina
If the camera was purchased in Argentina, the shape of
the Charging AC Adapter EH-68P (AR) differs from that
supplied in other countries, and a plug adapter is not
included. Proceed to step 2.
2 Be sure that the power-on lamp and the monitor are off.
• Be sure to insert the battery into the camera (A 14) and turn off the camera (A 19).
3
Use the supplied USB cable to connect the Charging AC Adapter to the camera.
B Connecting the Cable
When connecting the cable, be sure that the camera connector is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do not pull the
connector at an angle.
EH-68P (AR)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
