Nikon D-LEDI User Manual

Chapter 2 How to Use the Parts
7
2.2.1 Operation in SYNC Mode (Simultaneous Illumination Control Mode)
In the SYNC mode, you can turn the four LEDs on or off and control their brightness simultaneously.
Turning on or off
Press the illumination control dial to turn all the LEDs
on or off simultaneously.

Turning all the LEDs on or off
Illumination
control dial
All LEDs
Press
Illumination is switched
on or off.
When the illumination is on, it is indicated by the
LIT
icon to the left of “ALL LEDS”.
Beep sound emitted when turning LEDs on or of
f
A beep sounds when you turn LEDs on or off.
Controlling the brightness
By turning the illumination control dial, you can
control the brightness of all the LEDs simultaneously.

Controlling the brightness of all the LEDs
Illumination
control dial
All LEDs
Turn
The brightness of all the
LEDs changes.
The brightness is controlled in 101 steps from 0 to
100. The current brightness is indicated by a value
and bar graph on the display.
Number of steps of the illumination control dial
When the illumination control dial is turned to the click-stop position, the number of steps for each click changes
the brightness value. The number of steps can be set between 1 to 5. The default setting for the number of steps
is “5”.
OFF
ON
Press the illumination
control dial.
LIT
appears when the
illumination is on.
Bar graph
Brightness
value
Turn the illumination
control dial.

Nikon D-LEDI Specifications

General

Brand	Nikon
Model	D-LEDI
Category	Lighting Equipment
Language	English