Network configuration
Configuring WAN
3FE-49441-ABAA-TCZZA
Issue 1
Table 8-12 LAN IPv6 parameters (continued)
Field Description
DNS Server Select a DNS server from the list.
Prefix Config Select a prefix config option from the list, either WANConnection (prefix will be obtained from the
WAN) or Static (enables you to enter the prefix).
Interface This field appears if you selected the Wan Connection option for the “prefix config” field. Select a
WAN connection interface from the list.
DHCPv6 Server Pool
DHCP Start IP Address Enter the starting DHCP IP address.
DHCP End IP Address Enter the ending DHCP IP address.
Whether the address info through
DCHP
Select this checkbox to enable address information retrieval through DHCP.
Whether other info obtained
through DHCP
Select this checkbox to enable retrieval of other information through DHCP.
Maximum interval for periodic RA
messages
Enter the maximum interval (in seconds) for periodic Router Advertisement messages. The
interval range is from 4 to 1800.
Minimum interval for periodic RA
messages
Enter the minimum interval (in seconds) for periodic Router Advertisement messages. The
interval range is from 4 to 1800.
3
Select or enter the DHCP configuration information.
4
Enter the maximum and minimum intervals for RA messages.
5
Click Save/Apply.
E
ND OF
STEPS
8.19 Configuring WAN
1
Click Network→WAN from the left pane in the GPON Home Gateway page. The WAN page
displays.
To Next Page
Loading...
Need help?
General
